Just connect the included P1 cable to your smart meter and attach your devices to the splitter's outputs. Within a minute, everything is ready, allowing multiple devices to read real-time data simultaneously. Unlike cheap passive Y-cables, this active splitter buffers, amplifies and galvanically isolates each output (optocouplers per port), so up to four devices can communicate with your DSMR. The splitter can be used with electric, gas, water or in fact any meter with a pulse output (Volt-free contact, Reed relay or Open-collector). instruction manual MUST be adhered to. suitable for use in wet environments such as water meter pits. While most splitters offer only 2 or 3 ports, this model provides extra capacity at an affordable price. Four ports are unique in its class –.
[pdf] Power meter measurement in five steps: 1) Clean the meter port and the patch cord. 4) Connect the fiber under test. 5) Read the value, and compare. This guide walks through the full procedure -- from cleaning the connector to interpreting the result -- so your measurements are trustworthy on the first try. 3). An optical power meter measures the strength of light traveling through a fiber optic cable, giving you a reading in dBm (decibels relative to one milliwatt). In this guide covers the basics so you can measure optical power. Accurately testing an optical Transceiver means proving two things: that the module is emitting the right power at the right wavelength, and that the link it's attached to delivers that signal without unexpected loss or reflections. In practice you'll use two complementary tools — an optical power.
[pdf] 
