To connect an optical module, insert it carefully into the device port, remove dust caps, attach labeled fiber cables correctly, and ensure proper alignment of transmit and receive ends.

Step-by-Step Connection Procedure

1. Prepare the Optical Module
   • Remove the optical module from its packaging and keep the dust plug aside for later use .
   • Handle the module carefully to avoid electrostatic discharge (ESD) or physical damage .
2. Insert the Module
   • Gently push the optical module into the designated optical interface until you hear a click .
   • If it does not fit, rotate the module 180 degrees and try again. Do not force it, as this can damage the port .
3. Prepare the Fiber Cables
   • Remove dust caps from both ends of the fiber optic cables .
   • Attach temporary labels to each end of the fiber to identify connections, especially for transmit (TX) and receive (RX) ends .
   • Ensure the fiber ends are clean and free of dust or debris.
4. Connect the Fiber
   • Insert one end of the fiber into the optical module and the other end into the remote device or media converter .
   • Match the transmit port of the module to the receive port of the remote device and vice versa. Reversing the connections will prevent communication .
5. Secure and Label
   • Once connected, replace temporary labels with permanent ones for proper identification .
   • If the module is not in use, cover it with the dust plug to protect it from dust .
6. Power and Test
   • If using a media converter or powered module, connect it to the appropriate power supply (e.g., 5–9V DC) and verify that the link LED lights up, indicating a successful connection .

Safety and Handling Tips

• Always wear an ESD wrist strap or take anti-static precautions when handling optical modules .
• Avoid touching the fiber ends or optical surfaces to prevent contamination .
• Be aware that some modules use low-power lasers; avoid direct eye exposure even if they are Class 1 safe .
• Only qualified personnel should perform installation to prevent injury or equipment damage . By following these steps, you can safely and effectively connect an optical module (ORT) to your network equipment, ensuring reliable fiber optic communication.